- Colorescience Face Shield Flex:
Activate. Develop. Set. Dispense onto fingertips and rub gently to release and activate encapsulated pigments. As the shade begins to develop from white to your shade, apply to moisturized face and continue to blend for even coverage. Watch as it adjusts to your skin to immediately blur imperfections and even skin tone. The shade is fully developed when product is no longer white. Allow 1-2 minutes for shade to adjust completely. Set with one of our Total Protection brush-on sunscreens or follow with foundation for full-color coverage. - Pro Tip: Layer underneath your foundation for fuller color coverage or use with Face Shield Glow or Face Shield Bronze to enhance your look.
- One and Done: Evenly apply one layer to entire face, including under eyes for a look that's naturally you and powerfully protected.
- The Foundation Replacer: Build your coverage to your ideal level of flawless perfection. After applying your first layer, wait 1 minute before applying another layer. If you find yourself between two shades, feel free to mix and match any Face Shield products to create your ideal shade match. All Face Shields contain the same great all-mineral actives SPF 50 protection so you'll never have to compromise protection for color.
Colorescience Brush-On Shield SPF 50
1. OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Put cap back on.
2. ACTIVATE: With the cap still on, hold the brush with cap facing down and tap 3-5 times on a hard surface. Put some power behind those taps! Then remove the cap and run your finger through the bristles to ensure powder is flowing. Repeat tapping if needed, until you see a small puff of powder in the air when running your finger through the bristles.
3. APPLY: Using small circular motions, sweep directly onto dry bare skin, moisturized skin, or over makeup. Apply generously across your face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.
Benefits of Colorescience Face Shield Flex SPF 50:
- Provides environmental protection against UVA/UVB, pollution, blue light, and infrared radiation.
+ Flecks of encapsulated pigments adjust to skin's natural tone
+ Hydrating and antioxidant-rich formula
+ Free of parabens, sulfates, phthalates, oil, dyes, and fragrance
+ 100% chemical-free active ingredient
+ Broad Spectrum SPF 50/PA++++
+ Water/sweat resistant (40 minutes)
+ Dermatologist tested, hypoallergenic, non-comedogenic
+ Medium color coverage, Demi-Matte natural finish
Benefits of Colorescience Brush-On Shield SPF 50 Powder Sunscreen:
- Always 100% chemical-free, mineral sunscreen actives
+ Hydrating and antioxidant-rich formula
+ Convenient, easy-to-apply, portable brush
+ Broad Spectrum SPF 50/PA++++
+ Water/sweat resistant (80 minutes)
+ Dermatologist recommended
+ Hypoallergenic and non-comedogenic
Ingredients in Colorescience Face Shield Flex:
Vegan: Yes
Paraben-free: Yes
Fragrance-free: Yes
Active Ingredients:
Zinc Oxide 12%
Inactive Ingredients:
Water, C12-15 Alkyl Benzoate, Butyloctyl Salicylate, Lauryl PEG-8 Dimethicone, Isododecane, Propanediol, Caprylyl Methicone, Dimethicone, Niacinamide, Tridecyl Salicylate, Dimethicone/Vinyl Dimethicone Crosspolymer, Trilaureth-4 Phosphate, Dimethiconol/ Propylsilsesquioxane/ Silicate Crosspolymer, Lauryl PEG-10 Tris(trimethylsiloxy)silylethyl Dimethicone, Mica, Polyester-1, Maltodextrin, Sodium Chloride, Bisabolol (Levomenol), Disodium Lauriminodipropionate Tocopheryl Phosphates, Ethylhexylglycerin, Tremella Fuciformis Sporocarp (Silver Ear Mushroom) Extract, Allantoin, Silica Dimethyl Silylate, Caprylyl Glycol, Isoceteth-10, Zein, Hexylene Glycol, Dimethylmethoxy Chromanol, Synthetic Fluorphlogopite, Zea Mays (Corn) Starch, Silica, Caesalpinia Spinosa (Tara) Fruit Pod Extract, Hydrogenated Lecithin, Tetrasodium Glutamate Diacetate, Caprylic/Capric Triglyceride, Helianthus Annuus (Sunflower) Sprout Extract, Phenoxyethanol, Sodium Benzoate, Benzoic Acid, Dehydroacetic Acid, Sodium Hydroxide, Sodium Myristoyl Glutamate, Aluminium Hydroxide, Titanium Dioxide (CI 77891), Iron Oxides (CI 77491, CI 77492, CI 77499).
NOTE: This product contains Niacinamide, or Vitamin B3. If you have a known allergy to Niacinamide, or suspect you may be allergic, please perform a patch test on the forearm or neck area before using this product.
Ingredients in Colorescience Brush-On Shield SPF 50:
Vegan: Yes
Paraben-free: Yes
Fragrance-free: Yes
Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%
Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499)
